MK-5000 Series Wet Cutting Block Saws

• 20"-blade capacity gives 8" depth of cut
• Precision screw feed mechanism allows the cutting head to be easily raised or lowered to the precise cutting depth required
• Stay level blade guard cover gives 180° coverage at all times
• Open-back design allows an 8" high block to be cut in a single pass
• Conveyor cart built from heavy-duty cast aluminum
• 3 phase saws are equipped with GE NEMA 1 starters with NEMA 4 enclosure
• Adjustable water supply for maximum blade protection
• Friction lock prevents cutting head movement during use
• Built-in tie-downs for safer saw transport
• Ergonomically designed handle for reduced operator fatigue
• Spherical rod ends are used to maintain proper cutting head alignment
• Gas saw engine attachment is via four vibration isolation mounts
• Gas saws come with belt driven, self-priming centrifugal water pumps that can be disengaged for dry cutting
• Heavy-duty built-in forklift brackets allow lift to approach from front, back, or either side
• One-year limited warranty

MK-2000 Series Wet Cutting Brick & Block Saws

• MK-2000 Series Features
• 14" blade capability and 5" depth of cut
• Convenient ON/OFF switch for operator safety
• Precision engineered, cast-aluminum structural components & jig-welded steel frame assembly
• Stay level blade guard gives 180° coverage at all times
• Drop down blade shaft is built with sealed, permanently lubricated, heavy-duty bearings
• Open-back design allows for material up to 16" long to be cut
• Recoil spring return cutting head
• Cast aluminum blade guard with stainless steel water tubes that will not bend or rust
• Adjustable water supply for maximum blade protection
• Includes rip guide and 14" general purpose wet/dry diamond blade
• One-year limited warranty

• MK-2000 Series Electric Saw Features
• Professionally engineered, thermally protected, dual-voltage motor
• Convenient toggle switch to change motor from 115V and 230V
• Submersible electric water pump on electric series saws

• MK-2000 Series Gas Saw Features
• Reliable and powerful 5 1/2 HP Honda or 6 HP Robin gas engine
• Shock-absorbing engine mounts for smooth operation
• Shaft system utilizes Micro "V" belts and precision machined pulleys
• Belt driven, self-priming centrifugal water pump on gas series saws

MK-2000 Pro Series

• MK-2000 Pro Series Features
• 14" blade capability and 5" depth of cut
• Convenient ON/OFF switch for operator safety
• Precision engineered, cast-aluminum structural components & jig-welded steel frame assembly
• Stay level blade guard gives 180° coverage at all times
• Drop down blade shaft is built with sealed, permanently lubricated, heavy-duty bearings
• Open-back design allows for material up to 16" long to be cut
• Recoil spring return cutting head
• Cast aluminum blade guard with stainless steel water tubes that will not bend or rust
• Adjustable water supply for maximum blade protection
• Includes rip guide and 14" general purpose wet/dry diamond blade
• One-year limited warranty

• MK-2000 Pro Electric Saw Features
• Professionally engineered, thermally protected powerful "dual-voltage" AC induction motor
• Shaft system utilizes dual "V" belts and precision machined pulleys
• Convenient toggle switch to change motor from 115V and 230V
• Includes a powerful, fully submersible electric water pump

• MK-2000 Pro Gas Saw Features
• Reliable and powerful 5 1/2 HP Honda or 6 HP Robin gas engine
• Shock-absorbing engine mounts for smooth operation
• Shaft system utilizes Micro "V" belts and precision machined pulleys
• Belt driven, self-priming centrifugal water pump on gas series saws

MK-1080

• MK-1080 Features
• Professionally engineered, thermally protected 1-1/2 HP motor
• Recoil spring counterbalanced cutting head
• Zinc-plated frame and guide-bar assembly supported by maintenance-free nylon roller wheels.
• Heavy-duty blade shaft assembly with dual-sealed bearings & precision machined shaft
• Single piece reinforced zinc-plated steel frame has carrying handles for easy transportation
• Hinged blade guard with stainless steel water tubing
• 10" MK-10S Diamond Blade and an industrial water pump included
• One-year limited warranty

BX-3

• BX-3 Features
• Portable and lightweight
• High torque 13 AMP, 115 motor
• Open-back design allows for material up to 16" long to be cut
• Easy to grip nylon handle with built-in lockable trigger switch
• Replaceable dust filter
• Spring-loaded head can be locked in the down position
• Heavy-duty cast aluminum rolling conveyor cart
• Comes with 14" dry masonry cutting diamond blade and 2 extra filters
• Optional dust collection hood available
• One-year warranty

PX-3

• PX-3 Features
• Lightweight and portable, 37 lbs.
• Easy to replace dust filter
• Lockable trigger switch
• Pivoting backstop cuts material at any angle
• Motor has built-in thermal overload protection and dynamic brake
• Comes with 14" PX-10 dry cutting diamond blade
• Locking trigger switch
• Dust collector nozzle for connection to vacuum systems
• One-year warranty

MK-1270/1495

• MK-1270 / 1495 Features
• Ideal for concrete, masonry and building materials of all kinds
• Service friendly design allows the operator easy access to the starter housing and rope
• Three-stage air filter system for reliable operation in dusty cutting environments
• Pressure water feed kit with control valve and quick disconnect fitting included with saw.
• Dual position blade mount: Blade can be positioned in the center of the saw for optimum balance and maneuverability, or laterally (on the outside of the saw) when cutting is to be preformed along a wall, curbstone or other obstructions
• Quick action belt tensioning system
• Vibration damping system based on a unique D2M mass system that absorbs vibrations caused by the engine & diamond wheel
• Maintenance-free electronic ignition, fully enclosed to protect against dust & humidity
• One-year limited warranty
• UL Approved

MK-70