VOCOMP-30 is a ready-to-use, 30% solids Concrete Curing and Sealing Compound formulated of special acrylic polymers in a true water-base carrier. VOCOMP-30 provides improved resistance to rain, sun, freezing temperatures, most acids and industrial chemicals, petroleum, deicing salts, cleaning agents (except aromatic solvents), diluted caustics and other pollutants.

Color-wise, VOCOMP-30 appears "milky-white" in the container and when first applied, leaves a "bluish" cast on the concrete for easy visual coverage. VOCOMP-30 dries clear to provide a transparent sheen finish. This sheen can be controlled by the number of coats applied. VOCOMP-30 meets maximum VOC content limits of 700 g/L for Concrete Curing and Sealing Compounds as required by the U.S. EPA Architectural Coatings Rule.

SURE-STEP slip-resistant additive is a finely ground polymer material for addition to concrete sealers for slip resistance. This additive can be added to most film-forming water and solvent-based sealers, including the CS-309™, SEAL-CURE™ and VOCOMP® Series, as well as TIAH® and DECRA-SEAL™ from W. R. MEADOWS. Please consult sealer manufacturer prior to using, if using a product not listed above.

SURE-STEP provides improved chemical and abrasion resistance, and is more comfortable to bare feet on treated surfaces than sand or aggregate additives. The product's low density and insolubility characteristics will help reduce settling and provide optimum performance in its various applications, without changing the viscosity. Due to its low density, SURE-STEP stays suspended in thin materials.

LIN-SEAL Penetrating and Anti-Spalling Compound is a specification-grade formulation of boiled linseed oil in mineral spirits. LIN-SEAL is specifically compounded to prevent the spalling and scaling of concrete. This type of penetrating compound is recommended by many State Departments of Transportation for prolonging the life cycle of concrete exposed to water, salts and other destructive materials. Meets maximum VOC content limits of 400g/L for concrete protective coatings as required by the U.S. EPA Architectural Coatings Rule.

LIN-SEAL EMULSION Curing and Sealing Compound is a true water-base, high solids solution of boiled linseed oil. LIN-SEAL EMULSION is a liquid membrane cure for freshly placed concrete that helps retain original moisture to aid cement hydration and assist in the development of high early and ultimate strengths. LIN-SEAL EMULSION is a single application penetrating sealer that protects existing concrete from the effects of de-icing chemicals. It also prevents map cracking, checking, spalling and scaling.

LIN-SEAL EMULSION appears milky-white in the container and when first applied, providing visual identification of covered area. Once applied and dried, it forms a clear transparent film, which provides an impermeable seal for optimum water retention.

LIN-SEAL EMULSION meets maximum VOC content limits of 700 g/L for Concrete Curing and Sealing Compounds as required by the U.S. EPA Architectural Coatings Rule.

CURING AND ANTI-SPALLING COMPOUND

Description
LIN-SEAL WHITE Curing and Anti-Spalling Compound is a true water-base, white pigmented, high solids emulsion of boiled linseed oil. When properly applied, it provides an impermeable seal which optimizes water retention. The white pigments reflect the heat producing rays of the sun to keep the concrete surface cooler and prevent excessive heat build-up.

LIN-SEAL WHITE Curing and Anti-Spalling Compound is a true water base product. LIN-SEAL WHITE meets maximum VOC content limits of 350 g/L for Concrete Curing Compounds as required by the U.S. EPA Architectural Coatings Rule.

MED-CURE Concrete Curing Compound was specially formulated to supplement the W. R. MEADOWS' line of curing compounds and provide the contractor with a good, general-purpose curing compound for construction applications where economy is of prime importance. It contains no wax, resin or acids. MED-CURE meets maximum VOC content limits of 350 g/L for Concrete Curing Compounds as required by the U.S. EPA Architectural Coatings Rule.

SEAL CURE-309-25 is a clear, ready-to-use formula of styrene-acrylic polymers and quick evaporating solvents, which cures, seals, hardens and dustproofs freshly placed concrete surfaces, newly cured bare concrete and improves the wearability of aged concrete surfaces. SEAL CURE-309-25 meets maximum VOC content limits of 700 g/L for Concrete Curing and Sealing Compounds as required by the U.S. EPA Architectural Coatings Rule.

When properly applied, SEAL CURE-309-25 provides an impermeable seal for optimum moisture retention, producing harder denser concrete. It also provides a durable, long-lasting moisture impermeable finish that improves resistance to chemicals, oil, grease, de-icing salts and abrasion. The use of SEAL CURE-309-25 will help minimize hair checking as well as premature cracking, dusting, spalling and other common defects that result when the concrete is not properly cured, or the workmanship, air entrainment and water/cement ratios vary. SEAL CURE-309-25 is easy and economical to use and apply. It dries quickly to protect new exterior concrete surfaces during construction. When used on existing concrete, SEAL CURE-309-25 restores surfaces to a newer and brighter appearance, allowing easier cleaning and maintenance.

SEAL CURE-309-30 is a clear, ready-to-use formula of styrene-acrylic polymers and quick evaporating solvents, which cures, seals, hardens and dustproofs freshly placed concrete surfaces, newly cured bare concrete and improves the wearability of aged concrete surfaces. SEAL CURE-309-30 meets maximum VOC content limits of 700 g/L for Concrete Curing and Sealing Compounds as required by the U.S. EPA Architectural Coatings Rule.

When properly applied, SEAL CURE-309-30 provides an impermeable seal for superior moisture retention, producing harder, denser concrete. It also provides a durable, long-lasting moisture impermeable finish that improves resistance to chemicals, oil, grease, de-icing salts and abrasion. The use of SEAL CURE-309-30 will help minimize hair checking as well as premature cracking, dusting, spalling and other common defects that result when the concrete is not properly cured, or the workmanship, air entrainment and water/cement ratios vary. SEAL CURE-309-30 is easy and economical to use and apply. It dries quickly to protect new exterior concrete surfaces during construction. When used on existing concrete, SEAL CURE-309-30 restores surfaces to a newer and brighter appearance, allowing easier cleaning and maintenance.

TIAH Acrylic Concrete Curing and Sealing Compound is an acrylic polymer solution that dries to a transparent film, which improves abrasion resistance of the concrete. TIAH provides a tough, clear film that will not after-yellow. It also provides improved weather and stain resistance, combined with a dustproof sealer. TIAH meets maximum VOC content limits of 700 g/L for Concrete Curing and Sealing Compounds as required by the U.S. EPA Architectural Coatings Rule.

VOCOMP-20 Water-Base Acrylic Curing and Sealing Compound is formulated of special acrylic polymers in a true water-base carrier. Once properly applied, VOCOMP-20 provides an impermeable seal for efficient moisture retention. Color-wise, VOCOMP-20 appears "milky white" in the container and, when first applied, it leaves a "bluish" cast on the concrete for easy, visual identification of coverage. VOCOMP-20 dries clear to provide a transparent sheen finish. This sheen can be controlled by the number of coats applied. VOCOMP-20 resists yellowing due to ultraviolet degradation and provides a durable, long-lasting finish that offers improved resistance to chemicals, petroleum and abrasives.

VOCOMP-20 will minimize hair-checking, premature cracking, dusting and spalling. However, good concrete and good concreting practices should be used as VOCOMP-20 is not a cure-all for improperly mixed or placed concrete. VOCOMP-20 meets maximum VOC content limits of_350 g/L for Concrete Curing Compounds as required by the U.S. EPA Architectural Coatings Rule.

VOCOMP-25 Water-Base Acrylic Concrete Curing and Sealing Compound is formulated of special acrylic polymers in a true water-base carrier. VOCOMP-25 provides improved resistance to rain, sun, freezing temperatures, most acids and industrial chemicals, petroleum, deicing salts, cleaning agents (except aromatic solvents), diluted caustics and other pollutants.

Color-wise, VOCOMP-25 appears "milky-white" in the container and when first applied, leaves a "bluish" cast on the concrete for easy visual coverage. VOCOMP-25 dries clear to provide a transparent sheen finish. This sheen can be controlled by the number of coats applied. VOCOMP-25 meets maximum VOC content limits of 700 g/L for Concrete Curing and Sealing Compounds as required by the U.S. EPA Architectural Coatings Rule.

200-WHITE SERIES Water-Base, White-Pigmented Curing Compounds are resin-base dispersions with selected white pigment. When properly applied, the compound provides an impermeable film, which optimizes water retention. The white pigment reflects the sun's rays to help keep the concrete surface cooler and helps prevent excessive heat build-up.

1200-WHITE SERIES meets maximum VOC content limits of 350 g/L for concrete curing compounds as required by the U.S. EPA Architectural Coatings Rule.

1300-CLEAR Water-Base, Wax-Base Concrete Curing Compound is an excellent cure for interior and exterior, horizontal and vertical concrete surfaces. When properly applied, it provides an impermeable film which optimizes water retention. 1300-CLEAR appears white in color when wet, but dries clear. It is also available with a red fugitive dye to visually aid application coverage.

1300-CLEAR meets maximum VOC content limits of 350 g/L for Concrete Curing Compounds as required by the U.S. EPA Architectural Coatings Rule.

The 1600-WHITE SERIES, Water-Base, White-Pigmented Concrete Curing Compounds are wax-base dispersions, with selected white pigments. When properly applied, they provide an impermeable film, which optimizes water retention. The white pigment reflects the sun's rays to help keep the concrete surface cooler and prevent excessive heat build-up.

The 1600-WHITE SERIES meets maximum VOC content limits of 350 g/L for Concrete Curing Compounds as required by the U.S. EPA Architectural Coatings Rule.

The 2200-WHITE SERIES includes 2245, 2250 and 2255. These ready-to-use concrete curing compounds are high solids, white pigmented, polyalphamethylstryene-based. These formulations were developed for various Departments of Transportation as premium grade, concrete curing compounds. The 2200-WHITE SERIES offers rainfall protection typically within 4 hours after application, developing sufficient hardness and film integrity.

The 2200-WHITE SERIES is white pigmented, to reflect the sun's rays, maintaining cooler concrete which reduces the expansive and contractive stresses which cause cracking during the hydration process. When properly applied, 2200-WHITE SERIES provides a tough, smooth, uniform film with excellent adhesion to the fresh concrete surface.

All products in the 2200-WHITE SERIES meet maximum VOC content limits of 350 g/L for Concrete Curing Compounds as required by the U.S. EPA Architectural Coatings Rule.

CS-309-25 Acrylic Curing and Sealing Compound is a clear, transparent, ready-to-apply, non-yellowing liquid compound formulated from special acrylic polymers and quick-evaporating solvents that effectively and economically cures and seals freshly placed concrete. CS-309-25 meets maximum VOC content limits of 700 g/L for Concrete Curing and Sealing Compounds as required by the U.S. EPA Architectural Coatings Rule.

Once properly applied, CS-309-25 provides an impermeable seal for optimum moisture retention. This produces a hard, dense, high-compressive strength concrete. CS-309-25 will minimize hair-checking as well as premature cracking, dusting, spalling and other common defects that result when concrete is not properly cured. This easy-to-use compound dries quickly and protects the concrete during construction. It resists adhesion of mortar droppings and permits easier clean-up.

CS-309-30 Acrylic Curing and Sealing Compound offers a 30% solids content. It is a clear, transparent, ready-to-apply, non-yellowing liquid compound formulated from special acrylic polymers and quick-evaporating solvents that effectively cures and seals freshly placed concrete. CS-309-30 meets maximum VOC content limits of 700 g/L for Concrete Curing and Sealing Compounds as required by the U.S. EPA Architectural Coatings Rule.

Once properly applied, CS-309-30 provides an impermeable seal for superior moisture retention. This produces a hard, dense, high-compressive strength concrete.

DECRA-SEAL is a non-yellowing, acrylic-based, high solids, liquid curing and sealing compound for decorative concrete. The product is clear, transparent and easy-to-apply. DECRA-SEAL also offers improved resistance to water, alkalis, mild acids and petroleum spirits. The product has been formulated to seal and protect decorative colored concrete by producing a hard yet flexible clear film. DECRA-SEAL meets the maximum VOC content limits of 700 g/L for Concrete Curing and Sealing Compounds as required by the U.S. EPA Architectural Coatings Rule. This product is specifically formulated for the residential decorative concrete market.

DECRA-SEAL W/B is a non-yellowing, urethane/acrylic polymer-based, high solids, liquid sealer for decorative concrete. The product is clear, transparent and easy-to-apply. DECRA-SEAL W/B also offers greatly improved chemical resistance when compared to standard acrylic only based curing and sealing compounds. The product has been formulated to seal and protect decorative colored concrete by producing a hard, yet flexible, clear film. DECRA-SEAL W/B meets the very strict maximum VOC content limits of 200 g/L for sealers as required by certain California Air Pollution Control Districts, as well as the 400 g/L VOC maximum required by the U.S. EPA Architectural Coatings Rule. This product is specifically formulated for the residential decorative concrete market.

EVAPRE Evaporation Retardant is an economical, high-quality, water-based compound. It is specifically designed to form a thin monomolecular film to reduce rapid moisture loss from the concrete surfaces prior to curing. EVAPRE provides a significant aid in producing high-quality concrete flatwork. Rapid evaporation of water is retarded, slab surface conditions are normalized, and workers can adhere more closely to established finishing schedules. EVAPRE is also VOC-compliant.

EVAPRE significantly reduces plastic shrinkage and cracking, wind crusting, stickiness, and sponginess which often cause poor and uneven surface texture. These conditions result when the hydration is more rapid than the movement of bleed water to the surface. EVAPRE effectively combats and minimizes the effects of rapid drying conditions such as low humidity, low dew point, high winds, direct sunlight, hot weather, heated concrete or placement of concrete in a heated enclosure or interior area during cold weather. The protective film shield disappears as soon as the concrete is no longer plastic.

EVAPRE-RTU Ready-To-Use Evaporation Retardant is an economical, high quality, water-based compound. It is specifically designed to form a thin monomolecular film to reduce rapid moisture loss from the concrete surfaces prior to curing. EVAPRE-RTU provides a significant aid in producing high-quality concrete flatwork. Rapid evaporation of water is retarded, slab surface conditions are normalized, and workers can adhere more closely to established finishing schedules. EVAPRE-RTU is also VOC compliant.

EVAPRE-RTU significantly reduces plastic shrinkage and cracking, wind crusting, stickiness and sponginess, which often cause poor and uneven surface texture. These conditions result when the hydration is more rapid than the movement of bleed water to the surface. EVAPRE-RTU effectively combats and minimizes the effects of rapid drying conditions such as low humidity, low dew point, high winds, direct sunlight, hot weather, heated concrete or placement of concrete in a heated enclosure or interior area during cold weather. The protective film shield disappears as soon as the concrete is no longer plastic.

The 1100-CLEAR SERIES Water-Base Concrete Curing Compounds are formulated from hydrocarbon resins and may be used on interior, exterior, vertical and horizontal concrete surfaces. Once applied, they form a liquid membrane that retains an optimum amount of water present in freshly placed concrete to allow complete hydration of the cement. NOTE: After approximately 4 weeks, the membrane begins to chemically break down. When the curing cycle is complete, the membrane will eventually dissipate from the surface. This process usually takes another 3 to 5 weeks under normal traffic, exposure to UV and weathering conditions.

The 1100-CLEAR SERIES meets maximum Volatile Organic Compound (VOC) content limits of 350 g/L for Concrete Curing Compounds as required by the U.S. EPA Architectural Coatings Rule.