REZI-WELD 3/2 Grout-Patch Kit is a moisture-insensitive, two-component epoxy kit for grouting, sealing base plates and patching concrete. Part A, the specially formulated epoxy resin and selected, graded aggregates are premixed and packaged in a 5-gallon container. A drop-in tray is provided to hold the separately packaged Part B, or activator. This handy, unitized packaging provides its own mixing vessel. Just open the pail, remove the tray, add the activator to the premixed epoxy-aggregate compound and it's ready to use. It's that easy.

REZI-WELD 3/2 Grout-Patch offers a flowable viscosity for application versatility. It provides a 50 to 60 minute work life and offers high compressive strength. REZI-WELD 3/2 Grout-Patch resists many industrial chemicals, alkalis, oils, gasoline, most solvents and some acids.

CG-86 Construction-Grade Grout is a non-ferrous, non-gaseous, non-shrink economical grout. It was specifically developed as a high-strength, cost-effective, general-purpose grout for use across a broad range of large and small construction projects. CG-86 is non-gaseous, will not rust and contains no added chlorides or gypsum. It is furnished pre-mixed and ready-to-use. CG-86 may be extended for deep grouting with pea gravel for greater yield and increased economy.

PAC-IT Packable Grout is a non-ferrous, non-gaseous, non-shrink grout specifically formulated for grouting applications, without the need for expensive form work. PAC-IT is a pre-mixed, low-slump, non-gaseous grout offering high density and strength. PAC-IT offers excellent workability and high one-day strengths in addition to the non-shrink property.

588 is a Portland cement based precision grout product. It is non-corrosive, non-gaseous and provides high density, high initial and ultimate flexural and compressive strengths. It can be mixed quickly, as needed, on the job-site. 588 offers exceptional workability and is easily placed by pouring or pumping. The product is designed to give non-shrink performance under various conditions, in interior or exterior applications.

SPEED-E-ROC is a pourable, rapid setting and hardening, high strength, hydraulic cement compound designed for anchoring and grouting. SPEED-E-ROC has a controlled expansion system and is non-shrink. SPEED-E-ROC has an initial set time of 10-20 minutes at 77° F (25° C) and obtains 5,000 psi (34.4 Mpa) in 1 hour.

REZI-WELD FLEX is a gray, two-part, pourable consistency, premium-grade, moisture insensitive, epoxy joint filler formulation. When cured, it is semi-rigid, with a Shore D Hardness of 60.

REZI-WELD (IP) Injection Pre-Pak is an amber-colored, two-component, low-viscosity, rapid setting, penetrating epoxy compound. REZI-WELD (IP) is easy-to-use and offers high-modulus and high-strength characteristics. It effectively bonds cured concrete or metal to concrete. REZI-WELD (IP) is resistant to most chemicals and moisture insensitive.

REZI-WELD LV STATE is an ultra low viscosity, rapid setting, epoxy-based, chemical anchoring structural adhesive. This anchoring adhesive and injection resin is moisture insensitive and provides high mechanical properties and bond strength to concrete and various other substrates. REZI-WELD LV STATE resists most chemicals and forms a structural monolithic bond.

REZI-WELD LV Low Viscosity Injection Epoxy is moisture insensitive, very low viscosity, high modulus, and high strength structural injection resin. REZI-WELD LV resists most chemicals and features a unique and innovative unitized packaging concept. It combines two pre-measured components into an easy-to-handle, single unit along with a handy, wood-mixing paddle. The unitized packaging eliminates mishandling and mismatching of the components on the jobsite.

REZI-WELD GEL PASTE STATE is a high viscosity, rapid-setting, thixotropic, structural, epoxy-based, chemical anhoring/bonding adhesive and injection resin. REZI-WELD GEL PASTE STATE provides high mechanical properties and bond strength to concrete and various other substrates. REZI-WELD GEL PASTE STATE is a two-component, moisture insensitive construction epoxy, which can be troweled, brushed, injected or pumped.

REZI-WELD GEL PASTE STATE is an easy-to-mix, easy-to-apply paste, ideal for filling cracks, anchoring, doweling, making small patches and general repairs in horizontal, vertical and overhead concrete surfaces. It is also suitable for surface sealing prior to pressure injection. When used as an adhesive, REZI-WELD GEL PASTE STATE fills all voids between the surfaces to be bonded.

REZI-WELD GEL PASTE is a high viscosity, rapid-setting, thixotropic, structural, epoxy-based, chemical anhoring/bonding adhesive and injectiion resin. REZI-WELD GEL PASTE provides high mechanical properties and bond strength to concrete and various other substrates. REZI-WELD GEL PASTE is a two-component, moisture insensitive construction epoxy, which can be troweled, brushed, injected or pumped.

REZI-WELD GEL PASTE is an easy-to-mix, easy-to-apply paste ideal for filling cracks, anchoring, doweling, making small patches and general repairs in horizontal, vertical and overhead concrete surfaces. It is also suitable for surface sealing prior to pressure injection. When used as an adhesive, REZI-WELD GEL PASTE fills all voids between the surfaces to be bonded.

REZI-WELD 1000 STATE is a medium viscosity, two-component, construction-grade structural epoxy adhesive. It is moisture-insensitive and resistant to many chemicals. High modulus, high-strength REZI-WELD 1000 STATE is color coded to assure proper mixing. It is self-leveling and easy to apply.

As a neat mix, REZI-WELD 1000 STATE is used to bond hardened concrete to fresh or hardened concrete. It can also be used to bond metals and other materials to hardened concrete. REZI-WELD 1000 STATE is also used to secure metal anchors, bolts, rebars and dowels in concrete.

Mixed with sand or aggregates, REZI-WELD 1000 STATE may be used to patch spalls or defects in concrete. A thin film coating sprinkled with sand or grit becomes a durable non-skid interior topping.

REZI-WELD 1000 is a medium viscosity, two-component, construction grade structural epoxy adhesive. It is moisture insensitive and resistant to many chemicals. High modulus, high strength REZI-WELD 1000 is color coded to assure proper mixing, self-leveling and easy to apply.

As a neat mix, REZI-WELD 1000 is used to bond hardened concrete to fresh or hardened concrete. It can also be used to bond metals and other materials to hardened concrete. REZI-WELD 1000 is also used to secure metal anchors, bolts, rebars and dowels in concrete.

Mixed with sand or aggregates, REZI-WELD 1000 may be used to patch spalls or defects in concrete. A thin film coating sprinkled with sand or grit, becomes a durable, non-skid pathway.

Two-component, non-sag, polyester-based, very rapid curing and hardening, high strength, structural anchoring packaged in a unitized cartridge system.